*rEVErSE MoTor
If the motor starts in opening, turn power off and on again, select “5 -
rEVErSE MoTor
” on the
display through UP and DOWN press OK and put on ON, or, if you have the Jolly 3 programmer,
activate the motor exchange function.
D) AMpEroMETrIC* (For electromechanical motors only)
This type of selflearning is possible ONLY for electromechanical operators and physical stops.
Note: to adjust sensitivity on obstacle refer to the special menu
E) WITH LIMIT-SWITCHES*
1 - LIMIT SWITCH INPUT CHECK: check each limit switch on both doors by activating them before
self-learning. The segment on the display will disappear when each limit switch is activated
SELF-LEARNING starts AUTOMATICALLY
SELF-LEARNING starts AUTOMATICALLY
ENGLISH
MENU
MENU
SEA
SEA
3 MOTOR
MECHANIC
OK
SET
SET
MENU
MENU
MENU
MENU
SEA
SEA
SEA
SEA
9
PROGRAMMING
9
PROGRAMMING
ON
ON
OK
OK
SET
SET
SET
SET
At this point it is necessary to wait until the leaf or leaves start before closing and automatically
complete the CLOSING - OPENING - CLOSING cycle.
At this point it is necessary to wait until the leaf or leaves first start closing and then automatically
complete the CLOSING - OPENING - CLOSING cycle.
9