SEA Unigate FV, Руководство пользователя, Страница: 28 / 40

SET DESCRIPTION DEFAULT
SET
VALUE
Off
Opening and closing
Only closing
Only opening
81
PERIODICAL PUSHOVER
Off 8h
(only if Pushover is ON)
Allows the repetition of the pushover function at a
distance of time adjustable from 0 to 8 hours at hourly
intervals
Off
Opening 1 Off - 3 s
Closing 1 Off - 3 s
Opening 2 Off - 3 s
Closing 2 Off - 3 s
End
83 EXTRA TIME * 0.0 s 10 s
With limit-switches, it adds an extra time to the
movement of the motors after the limit-switches
reading
1.0 s
Only closing
Pre-flashing only active before closing
(to access this setting push DOWN button
when 0.0 value is shown)
0.0 5.0 s Pre-flashing
Normal Normal
Light Control lamp
Always Always ON
Buzzer Buzzer
Off
The flashing light remains OFF with active timer and
open gate
On
The flashing light remains ON with active timer and
open gate
Off Disabled
1 240 Courtesy light setting from 1sec. to 4min.
In cycle Courtesy light in cycle
89
TRAFFIC LIGHT
RESERVATION
Off On
If ON, the partial input will be activated to work on the
auxiliary board "SEM" (traffic light management)
Off
90 PARTIAL OPENING 5% 100% Setting from 5% to 100%
50%
= Start Pause in partial opening same as in total opening
Off Disabled
1 240 Setting from 1 second to 4 minutes
Off
On photo2
On partial entry
Clock
Off Disabled
On Photo2 Function active on Photocell 2
On Partial entry Function active on Partial entry input
93 FIRE SWITCH
91 PARTIAL PAUSE
= Start
92 TIMER
Turns the selected input into an input to which connect
an external clock
Off
Off
FLASHING LIGHT AND
TIMER
Off
88 COURTESY LIGHT In cycle
85
PRE-FLASHING 0.0 s
86 FLASHING LIGHT
Normal
82
MOTOR RELEASE
If different from Off, the motor slightly reverse its
direction at the end of the cycle
It
depends
on motor
80 PUSHOVER
Allows the leaf to make an extra move at maximum
torque to ensure the tightening
Off
MENU SP
87
28