SEA Unigate FV, Руководство пользователя, Страница: 24 / 40

SET DESCRIPTION DEFAULT
SET
VALUE
Italiano Italian
English English
Français
French
Español Spanish
Dutch
Dutch
Start Start
Partial opening
Partial opening
External module
External module
Stop Stop
Relay 1
To Activate Relay 1 for 3 seconds. This function requires
menu "Relay 1" set on "TX Relay"
Relay 2
To Activate Relay 2 for 3 seconds. This function requires
menu "Relay 2" set on "TX Relay"
Bistable Stop
Pressed once, it stops the gate. Pressed twice, it reactivates
the START input
Latch opening
1 impulse opens and keep open.
A second impulse restore the movement
Latch closing
1 impulse closes and keep closed.
A second impulse restore the movement
Unloch
Storing of a command to unlock the electric brake
Delete a transmitter Deletes single transmitter
Move to EEP
Transfers the Tx stored on the control unit to an external
EEPROM (MEM), if connected
Clear memory
Deletes transmitter memory
End “Transmitters” menu output
Hydraulic *
230V Hydraulic operators - Series I (INVERTER)
Barrier * 230V Barrier - Series I (INVERTER)
Lepus Fast * Lepus FAST
BIG Fast **
BIG Super Fast ** BIG 2000 Fast - BIG Super Fast sliding operators
Series I BIG (INVERTER BIG)
BIG ** BIG 4000 sliding - Series I BIG (INVERTER BIG)
Bollards ** Bollards - Series I BIG (INVERTER BIG)
Surf *
Surf operator
Lepus Reversible * Lepus Reversible
Joint BF *
4 limit-switches hydraulic operator - Series I (INVERTER)
Off
Disabled
On In ON activates single leaf mode (Motor1)
On
In ON reverses opening with closing and/or vice-versa (both
limit-swiches are reversed)
Off Off
Automatic Automatic
Open-stop-close-stop-open
Step by step type 1
Open-stop-close-open
Step by step type 2
2 button Two buttons
Safety
Safety
Dead man Dead man
Off
OFF (semi-automatic logics)
1 240 Setting from 1 second to 4 minutes
Off The Start is not acceped during pause
On
The Start is acceped during pause
9
PROGRAMMING Off On Times learning start Off
10 TEST START Off On
Start command Off
14 RESET
15
END
16 SPECIAL MENU
* Operators to be managed through UNIGATE 1I or UNIGATE 2I ** Operators to be managed through UNIGATE 1I BIG or UNIGATE 2I BIG
8 START IN PAUSE Off
6 LOGIC
Automatic
7 PAUSE TIME
Off
UNIGATE FV MENU FUNCTIONS TABLE
MENU
1
LANGUAGE English
4 ONE SINGLE LEAF *
On
5 REVERSE MOTOR
Off
2 TRANSMITTERS
Start
Partial
Opening
3 MOTOR
Hydraulic
A count-down of 5 seconds will start by holding the UP button; at its end "INIT" will appear on the display as
confirmation of the control board reset
Press OK to return to the display of the firmware version and to the one of inputs state
Press OK to enter the special menu
24