Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Страница: 47 / 138

correct alignment screen, re-enter your numbers and select Save .
At this point, you MUST turn OFF the printer. You CANNOT print or
perform any additional maintenance routines on your machine
without powering OFF your printer upon completion of a Head
Alignment. You do not need to perform a complete shut down-
turning OFF the power by using the UI is sufficient.
After your printer has completed its shutdown cycle, your may turn it back
ON and either begin printing or perform another Head Alignment to check
the results of your previous calibrations. Keep in mind, you may be required to
perform 2-3 Head Alignment procedures to initially calibrate your machine for
printing.
Nozzle Check and Power Cleanings
To execute a Nozzle Check test print or a
Power Cleaning, select Power Cleaning
from the Epson Remote Panel Main
Screen. Within the next screen, select your
printer from the dropdown menu and
click on the desired function.
When the procedure is complete, click
Exit .
If the Nozzle Check does not print correctly, perform a regular head cleaning.
This is done by holding down the RIGHT arrow button for 3 seconds. After the
head cleaning has been completed, execute another Nozzle Check .
If, AT ANY TIME, you have performed three Nozzle Checks without
rebooting your printer, you must power OFF your printer before
executing another one.
Once you have obtained a satisfactory Nozzle Check, press the Power button
on the UI to turn OFF your printer. After shutdown process has been completed,
turn the power back ON and you may resume normal operations.
33
Chapter 4- Initialization Utilities