Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Страница: 116 / 138

Causes:
Ink in the Nozzle has dried out
•
Do Head Cleanings and Nozzle Checks until the problem is resolved.
o
Use a cleaning cartridge and run Head Cleanings until the problem is o
resolved.
A serious or permanent clog may require replacing the Print Head.
o
The Capping Station is not cleaning the Print Head
•
If the Capping Station is dirty, it will just add more debris to the Print Head,
causing it to become clogged. Thoroughly clean the Capping Station. It can
be cleaned with swabs included in the maintenance kit and a glass cleaner
like Windex. Be sure to clean the rubber seal around the Capping Station as
well as the rubber wiper blade.
Air bubbles in bulk system tubing are causing small amounts of ink to dry
•
inside Print Head/Nozzles.
Run Head Cleanings and print Nozzle Checks until a satisfactory test print is
achieved.
You are using a High Speed (HS) Print Mode.
•
Use a Standard or 2 Pass Print Mode. HS Print Modes are the fastest, but they
require the Nozzles to be in perfect alignment. Additionally, when using this
setting, head clogs tend to appear as banding.
Prevention:
Clean Capping Station daily.
•
Run Head Cleanings before printing in the morning as well as printing a
•
Nozzle Check to gauge the status of the Print Head prior to printing onto
garments.
Make sure the bulk ink system tubes don’t have any air in them prior to
•
printing.
Problem:
Files take a long time to print.
Causes and Solutions:
Printing from CorelDRAW is causing large spool files.
•
Printing from any version of CorelDRAW can create extremely large spool files.
This happens when one or more copies of a file are sent to the printer while
you are trying to print a number of images that require a second pass. It can
also happen if bitmap images are placed in the document. If the spool files
are larger than your physical memory, the file may not print or may take a
long time processing. Ways to reduce this include exporting the file in a JPEG
format, then bringing the file back into CorelDRAW using the Import function.
If the bitmap was created with a high resolution, try lowering the resolution to
102
Fast T-Jet Blazer Pro User’s Manual