Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Страница: 66 / 138

Fast T-Jet Blazer Pro User’s Manual
52
Each Shirtboard is held in the proper position by metal pins screwed into the
Platen- these align with holes in the garment holder base. If you have a Screen
Printing background, you may wonder what holds the garment in place. On the
Fast T-Jet Blazer Pro, the shirts just lay on the Shirtboard and friction takes care of
the rest.
Pictured below are the various sizes of the Shirtboard available to meet your
printing needs:
The garment holders are comprised of a foam rubber pad atop a
steel base. Although the base is nearly indestructible, the rest of
your printer is not. DO NOT set anything atop the Platen. IT IS NOT A
STORAGE SHELF and it WILL WARP.
DO NOT apply any cleaner or glues to the foam rubber pads, they
will crumble and disintegrate, leaving a mess on your shirts. The
storage cabinets beneath your printer are provided for your
convenience to help you store shirts, inks, etc.
Here are the steps for printing:
Flip the Power Switch to ON and the machine will go through different 1.
motions and clicks to get the Print Head positioned and ink flowing.
Using the handle, manually pull the Platen away from 2.
the printer until the third Shirtboard clears the Printer
Assembly.
Load your shirt(s). 3.
Shirts can be full of lint and some have more than others. Lint is NOT your •
Sleeve
Youth Standard Over-Sized