Screen Print & Inkjet Fast T-Jet Blazer Pro Скачать руководство пользователя страница 3

Страница: 3 / 138

No part of this publication may be reproduced mechanically or electronically or in any

form without the prior written permission of U.S. Screen Print & Inkjet Technology (U.S.

Screen). The information in this Manual is for informational use only, is subject to change

without notice and should not be construed as a commitment by U.S. Screen.

U.S. Screen assumes no responsibility or liability for any errors or inaccuracies that may

appear in this document.

T-Jet

, T-Jet

Blazer Pro, Fast T-Jet

Blazer Pro, FastINK™,

FastRIP™, FastARTIST™, FastBRIGHT™

and

FastFILMS™

are trademarks, trade names

or registered trademarks of U.S. Screen Print & Inkjet Technology, Tempe, Arizona. All

trademarks, trade names and copyrights are acknowledged for software and sample

shirt images. PostScript

, Adobe

Photoshop

and Adobe

Illustrator

are registered

trademarks of Adobe Inc. Apple and Macintosh are trademarks of Apple Corp.

CorelDRAW

is a registered trademark of the Corel Corporation. Epson™ is a trademark

of Epson Corporation. Windows

, Windows XP, Windows Vista and Windows 2000 are

trademarks or registered trademarks of Microsoft Corporation.

Federal copyright laws permit you to make a backup of any Software included with

your Fast T-Jet Blazer Pro for archival purposes only. Any other duplication of this

Software, including copies offered through sale, loan, rental or gift is a violation of law

and subject to both criminal and civil penalties.

We strive to continuously make improvements to our Inkjet-to-Garment printing system

and we reserve the right to make product changes and improvements.

This manual

contains the latest and most accurate information as of its publication date.

Some

product photos or descriptions within this Manual may vary slightly from the currently

shipping machine.

U.S. Screen Print & Inkjet Technology

Home of the U.S. Screen Printing Institute

a division of U. S. Graphic Arts, Inc.

1901 E. 5

Street

Tempe, AZ 85281 USA

Printed in the U.S.A.

Содержание Fast T-Jet Blazer Pro











































































































































Результаты поиска

Содержание Fast T-Jet Blazer Pro

Отзывы:

Похожие инструкции для Fast T-Jet Blazer Pro

Бренды по названию

Популярные бренды

Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Результаты поиска

Содержание Fast T-Jet Blazer Pro

Отзывы:

Похожие инструкции для Fast T-Jet Blazer Pro

Бренды по названию

Популярные бренды