Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Страница: 90 / 138

Since the pretreatment process can take some time to dry, we
recommend you pretreat as much of the production run as
possible to avoid delays due to drying time (Do this only after
becoming proficient with the Non-Textile Primer/Pretreatment).
Setting up an Image for Print
To setup an image for print you may use an application such as Photoshop,
Illustrator or CorelDRAW, however we recommend using FastARTIST. If you will be
printing White ink, you MUST use FastARTIST. For the purposes of this Manual, we
demonstrate will setting up the image using FastARTIST. The steps required for
printing with other graphic applications will be very similar- please consult your
application’s Owner’s Manual if needed.
Setup the printing area in which you will be printing on. To do this you will 1.
need a measuring tape and will need to measure the width and height of
the Non-Textile item. From within FastARTIST select File > FastRIP Setup.
From the 2. Setup window, select Page Setup . In
the Page Setup window, select Custom under
the Page option. Enter the Height and Width of
the Non-textile item you have measured. After
entering the values, click OK to return to the
workspace.
Select 3. Layout > Page Size. For the Page Size,
enter the Height and Width of the Non-textile
item you have measured. After entering the
values, click OK to return to the workspace.
The non-textile item dimensions will now be
represented by a black box located within the
workspace. If this is not displayed, click View >
Show Page Size to view the black box.
76
Fast T-Jet Blazer Pro User’s Manual