Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Страница: 46 / 138

If you are performing this procedure as part of your printer’s Initial
Setup or if you notice a severe registration issue, we recommend
you perform the Uni-Directional Alignment first, followed by a Bi-
Directional Alignment. If you only wish to fine tune printer output,
you can utilize the Bi-Directional Alignment as a standalone
procedure.
Within the Bi-Directional or Uni-Directional Alignment screens, place a 2)
check mark in each of the three boxes below Dot Size. Select Other for
Media Type, enter 2 for Paper Thickness and select Standard from the
Platen Gap dropdown menu.
DO NOT modify any of the numbers in the boxes at this time.
Prepare 1-2 sheets of film to cover an area 16” x 24” (41 cm x 61 cm) 3)
in size. You may also use paper to print the Head Alignment images,
however it will be very difficult to see White ink on White paper. Align your
paper or other media with the upper left hand corner of Shirtboard #1.
With the Printer in the Index position, Shirtboard #1 is the Shirtboard that is
now directly beneath the Assembly.
Press 4) Print.
Refer to Step #17 (page 28-29) for images and a description of the
resulting output and how to select the corresponding entry.
Once the printer has completed the test patterns, instead of entering the 5)
numbers through the LCD Display, enter the best results information in the
corresponding boxes on the Alignment Screen.
Click on 6) Save to record your calibrations. If you exit this screen without
saving your inputs, they will be lost. If this should occur, return to the
32
Fast T-Jet Blazer Pro User’s Manual