Screen Print & Inkjet Fast T-Jet Blazer Pro, Руководство пользователя

Страница: 88 / 138

Fast T-Jet Non-Textile Primer
Fast T-Jet Non-Textile Primer is designed to be used on high gloss,
non-porous surfaces as a primer coat prior to the application of our
standard Fast T-Jet Non-Textile Pretreatment.
DO NOT print directly onto this product.
Protect your work surfaces with newspaper.
DIRECTIONS:
Dip a fine bristle brush into the Primer, wiping off any •
excess on the side of the bottle. Gently brush Primer
over the surface of the non-textile item, making sure
there are no uneven areas.
The Primer must be applied in a thin even layer to ensure optimal print •
quality.
After the application is complete, clean the brush thoroughly with hot water •
to remove all Primer residue.
This product can be sprayed on, but the application may not be as
smooth as necessary for good print reproduction. If applying with
an airbrush, spray bottle or paint sprayer, you may need to dilute
the solution with water. If you dilute the Primer, two coats may be
necessary.
Clean up spills and brushes with soap and water immediately after use. •
Allow the Primer to dry thoroughly before applying the Non-Textile •
Pretreatment. Dry time will vary but can take up to one hour or more. To
speed up the drying process, you may use a hair dryer, heat lamp or a heat
gun set on a low temperature setting.
A Heat Press may also be used by setting the non-textile item under the •
heating element. However, DO NOT allow the heating element to touch the
non-textile item.
74
Fast T-Jet Blazer Pro User’s Manual