Scout Boats 380 LXF, Руководство пользователя

Страница: 124 / 210

124
Exterior Equipment
11.3 Hull
Engine Mounting System
Your Scout is equipped with an engine mounting
system and platform that is integrated into the
hull and stringer system that is designed to dis-
tribute the stresses of engine weight and thrust
throughout the entire hull.
The engine hoses and cables or transom gel coat
can be damaged by tilting the engines to the full
up position with the engines turned to the wrong
position. You should monitor the engines as they
tilt to determine best full tilt engine position for
your boat.
Platform Boarding Ladder
A telescoping boarding ladder is recessed into
the starboard side of the platform. To use the
ladder, make sure the engines are shutdown and
lower the platform. Pull the ladder out from the
platform and extend it to the full down position.
The ladder must be retracted and pushed into the
recess before raising the platform.
The platform is equipped with a grab rail to as-
sist in boarding that is retractable and flush with
the platform when not in use. To use the grab
rail, pull up on the center of the rail until it locks
in the deployed position. To retract the rail, push
down on the center of the rail until it is flush with
the platform.
Unassisted Boarding Situations
When using the swim platform ladder in an unas-
sisted boarding situation in deep water, hold the
swim platform and brace your feet against the hull
for stability. Then rotate the ladder out of the recess
to the down position with your free hand. Hold the
side rail of the ladder for stability, then use your free
hand and feet to pull the ladder out to the extended
position. Use the ladder side rails and platform grab
rail for stability while boarding. Remember to retract
the ladder and fold it into the recess before starting
the engines.
Engine Mounting System & Platform
https://www.boat-manuals.com/