Scheppach 1901302901, Перевод из оригинального руководства

Страница: 23 / 40

english 23
Malfunction Remedies
Malfunction Possible Cause Remedy
Saw blade loosens
itself after the motor
has switched on fastening nut not tightened enough tighten fastening nut, M 20 left thread
Motor doesn‘t start a) power breakdown a) check power fuse
b) extension cord defect b) see operating instructions for electrical
contacts
c) connections to motor or switch not
correct, brake doesn‘t ventilate
c) take it to your electrician for examination
d) motor or switch defect d) see operating instructions for electrical
contacts
Motor advances or
retreats a) condensor defect a) have your electrician exchange it
b) incorrectly connected b) have an electrician change the polarity
of the electrical outlet
Motor has no power,
shuts itself off a) overloading through a dull saw blade a) insert a sharpened saw blade.
b) thermo protection responds b) ready to turn on again after cool-down
time has been met
Burns on the cutting
surface
– length cuts a) dull saw blade a) insert a sharpened saw blade
b) wrong saw blade b) insert a saw blade for length cuts
c) length stop not parallel to saw blade c) exchange length stop
– diagonal cuts d) slide carriage not parallel to saw blade d) adjust slide carriage to the saw blade
Cutting power drops
at full motor speed Belt loose Tighten belt, see Maintenance
Workpiece jams
between saw blade
and longitudinal
fence Longitudinal fence not running parallel to
saw blade Check longitudinal fence setting and
readjust