Schempp-Hirth Flugzeugbau Ventus-3T Sport, Руководство по эксплуатации самолета, Страница: 147 / 177

SCHEMPP-HIRTH FLUGZEUGBAU GmbH, KIRCHHEIM/TECK
Ventus-3T „Sport“ FLIGHT MANUAL
April 2018
Revision –
7.3.15
Emergency procedure
o
Press the menu button to affirm the error message(s) in the LCD-
display.
o
Check the fuse for the pylon spindle drive in the engine control unit and
push the fuse in again if necessary.
If the error continues and the engine control unit doesn’t return to the
automatic mode:
o
Press manual operation switch in the designated direction. Then it will
take approx. 3s until the power plant starts to move.
Attention:
The power plant can only be retracted when the ignition is switched off!
o
If another error message appears in the LCD-display affirm it with the
menu button.
Don’t release the manual operation switch while doing this before the
final position is reached. Otherwise the manual operation switch must
be pressed again and the power plant restarts to move with 3s delay.
o
When the engine is fully extended switch ignition ON if you wish to start
the engine.
Important note:
When, in manual mode, the manual operation switch is pressed
although the limit switch for one of both end positions has already
been reached (green LED shining), either the error message E _ S 0
or E _ S 1 will be displayed after approx. 3s. In case the error
message is affirmed normal operation of the engine control unit can be
continued without any restrictions.