Savch S3100E Series, Руководство пользователя

Страница: 15 / 150

11
Item Detailed information
arrival, frequency limitation, torque limit Ready to run, AVI1>AVI2, upper
limit frequency arrival, lower limit frequency arrival (operation related),
undervoltage status output, communication setting, cumulative power-on
time arrival, frequency arrival output, timing arrival output, offload, reverse
In operation, the zero current state, the module temperature reaches, the
output current exceeds the limit, the lower limit frequency arrives (the stop
is also output), the alarm output (continues to run), and the running time
arrives.
Analog signal output
Corresponding to the actual output frequency, output current, output
voltage, etc.
Fault signal contact
Contact "ON" (one "C" contact relay or two open collector outputs when the
AC drive fails)
Inner function
Output frequency upper and lower limit setting, instantaneous power failure
restart, abnormal fault restart, speed tracking
Simple PLC, multi-speed operation, PID control, timing control
Automatic regulated output regulation
Abnormal record, parameter lock, parameter factory reset
Reverse rotation prohibited, overcurrent stall prevention, overvoltage stall
prevention, electronic thermal relay
Protection function
Short circuit protection, acceleration over current, deceleration over
current, constant speed over current, acceleration over voltage,
deceleration over voltage, constant speed over voltage, bus undervoltage
fault, motor overload, inverter overload, over torque protection, loss phase
on the input (7.5G/11P and above), loss phase on the output , module
overheating, external fault, communication fault, current detection fault,
motor self-learning fault, parameter read and write abnormality, inverter
hardware abnormality, motor short circuit to ground, running time arrival,
the power-on time arrives, the load dropped, the PID feedback
disconnected, and the fast current limit timeout.
Number of part on keypad
Contains 8 function keys, 5-digit 8-segment LED display, 7 status indicator
LED lightsCan set the frequency, display the actual output frequency,
output current, user-defined unit Parameter browsing and modification
settings and parameter locking, abnormal fault display Executable
operation, stop, reset, forward/reverse, jogging
en
vi
ro
n
m
en
t
Operation temperature
-
10
℃
to +50
℃
(+40
℃～
+50
℃
Below 90%RH, No condensation)
Temperature of stock
-
20 ℃ to +60 ℃
Humidity of operation
environment
Below 90%RH, No condensation
Height of installation No more than 1000m in height, no corrosive gas, liquid, dust
Vibration Below 20Hz 9.80665m/s 2 (1g)
，
20
～
50Hz 5.88m/s 2 (0.6g)
Enclosure IP20 (Depending on the end customer's installation environment)
Note:The instantaneous power failure compensation time varies due to the inverter capacity. If a long
instantaneous power failure time is required, the external “instantaneous power failure compensation device”
can be added.