Savch S3100E Series, Руководство пользователя

Страница: 104 / 150

100
08-08 Inverter module radiator temperature
Factory setting -
Setting range 0.0
℃～
100.0
℃
Displays the temperature of the inverter module IGBT.
Different types of inverter modules have different IGBT over-temperature protection values.
08-09 Reserved
Factory setting -
08-10 Software version No.
Factory setting -
08-11 Cumulative running time
Factory setting -
Setting range 0h
～
65535h
Cumulative running time of the inverter is displayed. When the running time reaches the set running time 09-17,
the inverter's multi-function digital output function (12) outputs an ON signal.
08-12
Load speed display the number of decimal places

Factory setting 21
Setting range
Units: Number of decimal places for load speed
Tens place:Number of decimal places for feedback speed
0
0 decimal place
1
1 decimal place
2
2 decimal places
3
3 decimal places
Used to set the number of decimal places for load speed display.The following example illustrates the calculation
method of load speed:
If the load speed display coefficient 08-06 is 2.000, the load speed decimal point number 08-12 is 2 (2 decimal
points), when the inverter running frequency is 40.00Hz, the load speed is: 40.00*2.000 = 80.00 (2 decimal points
display)
If the inverter is in a stopped state, the load speed is displayed as the speed corresponding to the setting
frequency,that is, "set load speed". Taking the set frequency of 50.00Hz as an example, the load speed in the stop
state is: 50.00*2.000 = 100.00 (2 decimal places display)
08-13 Cumulative power-on time
Factory setting -
Shows the cumulative power-on time of the inverter since the factory.
When this time reaches the set power-on time (09-17), the inverter's multi-function digital output function (24)
outputs an ON signal.
08-14 Cumulative power consumption
Factory setting -
Setting range 0
～
65535 degree
Displays the cumulative power consumption of the inverter so far