Savch S3100E Series, Руководство пользователя

Страница: 109 / 150

105
Output frequency Hz
Time
Jump frequency 2
Jump frequency amplitude
Jump frequency 1
Jump frequency amplitude
Jump frequency amplitude
Jump frequency amplitude
Figure 5-19 Effective schematic diagram of jump frequency during acceleration and deceleration
09-25
Switching frequency point between acceleration time 1 and
acceleration time 2

Factory setting
0.00Hz
Setting range 0.00Hz
～
Max frequency
09-26
Switching frequency point between deceleration time 1 and
deceleration time 2

Factory setting
0.00Hz
Setting range 0.00Hz
～
Max frequency
During the operation of the inverter, different acceleration and deceleration times can be selected according to the
operating frequency range instead of the MI terminal.
Figure 5-20 is a schematic diagram of acceleration/deceleration time switching. During acceleration, if the
operating frequency is less than 09-25, select acceleration time 2; if the operating frequency is greater than 09-25,
select acceleration time 1.
During deceleration, if the operating frequency is greater than 09-26, select deceleration time 1, if the operating
frequency is less than 09-26, select deceleration time 2.
Acceleration
time 2
Time
Output frequency
Hz
Set frequency
09-25
09-26
Acceleration time 1 Deceleration time 1
Deceleration
time 2
Figure 5-20 Acceleration and deceleration time switching diagram
09-27 Terminal jogging priority

Factory setting 0
Setting range
0
Invalid
1
Valid
This parameter can set the priority of the terminal jog command to the highest.