Copying
_ 3
•
On:
Prints output in sets to match the sequence of originals.
•
Off:
Prints output sorted into stacks of individual pages.
9.
Press
Stop/Clear
to return to ready mode.
10.
Press
Start
to begin copying.
One complete document will print followed by the second complete
document.
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages
onto one sheet of paper.
2 or 4-up copying is available only when you load originals into the
document feeder.
1
2
1
2
3
4
1.
Press
(Copy)
on the control panel.
2.
Place originals, face up, in the document feeder. Or you can use the
scanner glass with a single original document face down and closed the
scanner lid.
3.
Press
Menu
on the control panel.
4.
Press the up/down arrow to highlight
Copy Feature
and press
OK
.
5.
Press the up/down arrow to highlight
Layout
and press
OK
.
6.
Press the up/down arrow until
2up
or
4up
highlights and press
OK
.
7.
Press
Stop/Clear
to return to ready mode.
8.
Press
Start
to begin copying.
You cannot adjust the copy size using
Reduce/Enlarge
for the N-Up
feature.
Poster copying
Your original will be divided into 9 portions. You can paste the printed pages
together to make one poster-sized document.
This copy feature is available only when you place originals on the scanner
glass.
1.
Press
(Copy)
on the control panel.
2.
Place a single original face down on the scanner glass.
3.
Press
Menu
on the control panel.
4.
Press the up/down arrow to highlight
Copy Feature
and press
OK
.
5.
Press the up/down arrow to highlight
Layout
and press
OK
.
6.
Press the up/down arrow to highlight
Poster Copy
and press
OK
.
7.
Press
Stop/Clear
to return to ready mode.
8.
Press
Start
to begin copying.
Your original is divided into 9 portions. Each portion is scanned and
printed one by one in the following order:
Clone copying
The machine prints multiple original images on a single page. The number
of images is automatically determined by the original image and the paper
size.
This copy feature is available only when you place originals on the scanner
glass.
1.
Press
(Copy)
on the control panel.
2.
Place a single original face down on the scanner glass.
3.
Press
Menu
on the control panel.
4.
Press the up/down arrow to highlight
Copy Feature
and press
OK
.
5.
Press the up/down arrow to highlight
Layout
and press
OK
.
6.
Press the up/down arrow to highlight
Clone Copy
and press
OK
.
7.
Press
Stop/Clear
to return to ready mode.
8.
Press
Start
to begin copying.
You cannot adjust the copy size using
Reduce/Enlarge
for the
Clone
Copy
feature.
Book copying
The
Book Copy
feature allows you to copy an entire book. If the book is too
thick, lift the cover until its hinges are caught by the stopper and then close
the cover. If the book or magazine is thicker than 30 mm, start copying with
the cover open.
This copy feature is available only when you place originals on the scanner
glass.
1.
Press
(Copy)
on the control panel.
2.
Place a single original face down on the scanner glass.
3.
Press
Menu
on the control panel.
4.
Press the up/down arrow to highlight
Copy Feature
and press
OK
.
5.
Press the up/down arrow to highlight
Layout
and press
OK
.
6.
Press the up/down arrow to highlight
Book Copy
and press
OK
.
