Network setup
_ 7
Setting IPv6 addresses
Machine supports following IPv6 addresses for network printing and
managements.
•
Link-local Address
: Self-configured local IPv6 address. (Address starts
with FE80.)
•
Stateless Address
: Automatically configured IPv6 address by a
network router.
•
Stateful Address
: IPv6 address configured by a DHCPv6 server.
•
Manual Address
: Manually configured IPv6 address by a user.
DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the
following option for default dynamic host configuration:
1.
Press
Menu
on the control panel.
2.
Press up/down arrow to highlight
Network
and press
OK
.
3.
Press up/down arrow to highlight
TCP/IP (IPv6)
and press
OK
.
4.
Press up/down arrow to highlight
DHCPv6 Config
and press
OK
.
5.
Press up/down arrow to access the required value.
•
Routers
: Use DHCPv6 only when requested by a router.
•
DHCPv6 Addresses
: Always use DHCPv6 regardless of router
request.
•
DHCPv6 Off
: Never use DHCPv6 regardless of router request.
6.
Press
OK
.
Manual address configuration
1.
Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL (See "Connecting SyncThru™ Web Service"
on page 7).
For IPv4, enter the IPv4 address (http://xxx.xxx.xxx.xxx) in the
address field and press the Enter key or click
Go
.
2.
Click
Login
on the upper right of the SyncThru™ Web Service
website.
A log-in page appears.
3.
Type in the
ID
and
Password
then click
Login
.
If it’s your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
•
ID: admin
•
Password: sec00000
4.
When the
SyncThru™ Web Service
window opens, click
Settings
>
Network Settings
.
5.
Click
TCP/IPv6
.
6.
Enable the
Manual Address
In the
TCP/IPv6
section.
IPv6 Protocol
should enable.
7.
Select the
Address / Prefix
and click the
Add
button, then the router
prefix will automatically be entered into the address field.
Enter the rest of address. (ex: 3FFE:10:88:194::
AAAA
. “A” is the
hexadecimal 0 through 9, A through F.)
8.
Click the
Apply
button.
Installing printer driver
Driver installation for network printer in IPv6 network environment is same
as TCP/IPv4 (See "Installing network connected machine’s driver" on
page 3).
Select TCP/IP Port and when the list of machines are displayed, simply
select your machine's IPv6 address.
Connecting SyncThru™ Web Service
1.
Start a web browser such as Internet Explorer that supports IPv6
addressing as a URL .
2.
Click
Go
to access the SyncThru™ Web Service.
3.
Click
Login
on the upper right of the SyncThru™ Web Service website.
A log-in page appears.
4.
Type in the
ID
and
Password
then click
Login
.
If it’s your first time logging into SyncThru™ Web Service, type in the
below default ID and password.
•
ID: admin
•
Password: sec00000
5.
Select one of the IPv6 addresses (
Link-local Address
,
Stateless
Address
,
Stateful Address
,
Manual Address
) from
Network
Configuration Report
.
6.
Enter the IPv6 addresses. (ex: http://[FE80::215:99FF:FE66:7701])
Address must be enclosed in '[]' brackets.
