Supplies and accessories
_ 10
same name when you enter a new file name, the file will be
saved as a different name that is automatically programmed.
•
Overwrite :
You can set the machine to delete previous job
information on hard disk drive (HDD) as you store new job
information.
6.
Press
OK
.
Deleting residual image data
Image Overwrite is a security measure for customers who are
concerned about unauthorized access and duplication of classified or
private document.
1.
Press Menu on the control panel.
2.
Press the up/down arrow to highlight
System Setup
and press
OK
.
3.
Press the up/down arrow to highlight
Job Management
and press
OK
.
4.
Press the up/down arrow to highlight
Image Overwrite
and press
OK
.
5.
Press the up/down arrow to highlight the desired setting and press
OK
.
•
Immediate :
All residual image data from the machine will be
erased immediately after each job has been processed.
•
On Demand :
This option provides an on-demand facility for a
system administrator to erase all the real image data remained in
hard disk drive (HDD) after this option enabled. All existing jobs
will be deleted regardless of their status and all job submissions
will be prohibited for the duration of the overwrite.
6.
Press the up/down arrow to move to
On
or
Off
for
Immediate
.
Press the up/down arrow to move to
Enable
or
Disable
for
On
Demand
.
If you selected
On Demand
enabled, the machine confirms if
the overwrite feature starts now. Press the up/down arrow to
select
Yes
or
No
. If you select
Yes
,
On Demand
overwrite
starts as soon as you select
Yes
. If you select
No
, this feature
will be enabled.
7.
Press
OK
.
Checking replaceable’s lifespan
If you experience frequent paper jams or printing problems, check the
number of pages the machine has printed. Replace the corresponding
parts, if necessary.
1.
Press
Menu
on the control panel.
2.
Press the up/down arrow to highlight
System Setup
and press
OK
.
3.
Press the up/down arrow to highlight
Maintenance
and press
OK
.
4.
Press the up/down arrow to highlight
Supplies Life
and press
OK
.
5.
Press the up/down arrow until the item you want appears and press
OK
.
6.
Press
Stop/Clear
to return to ready mode.