Introduction
_ 5
Understanding the Status LED
The color of the
Status
indicates the machine's current status.
Status
Description
Off
•
The machine is off-line.
Green
Blinking
•
When the backlight slowly blinks, the machine
is receiving data from the computer.
•
When the backlight blinks rapidly, the
machine is printing data.
On
The machine is on-line and can be used.
Red
Blinking
•
A minor error has occurred and the machine is
waiting for the error to be cleared. Check the
display message. When the problem is
cleared, the machine resumes.
•
A small amount of toner is left in the cartridge.
The estimated cartridge life
a
a.Estimated cartridge life means the expected or estimated toner
cartridge life, which indicates the average capacity of print-outs and is
designed pursuant to ISO/IEC 19798. The number of pages may be
affected by operating environment, printing interval, graphics, media
type and media size. Some amount of toner may remain in the cartridge
even when
Replace new [ccc] toner
appears and the printer stops
printing.
of toner is close.
Prepare a new cartridge for replacement. You
may temporarily increase the printing quality
by redistributing the toner (See "Replacing the
toner cartridge" on page 2, "Redistributing
toner" on page 1).
On
•
A toner cartridge has almost reached its
estimated cartridge life
a
. It is recommended to
replace the toner cartridge (See "Replacing
the toner cartridge" on page 2).
•
A paper jam has occurred (See "Clearing
paper jams" on page 3).
•
The cover is opened. Close the cover.
•
There is no paper in the tray. Load paper in
the tray.
•
The machine has stopped due to a major
error. Check the display message (See
"Understanding display messages" on
page 8).
Samsung does not recommend using non-genuine Samsung toner
cartridge such as one that is refilled or remanufactured. Samsung
cannot guarantee a non-genuine Samsung toner cartridge's quality.
Service or repair required as a result of using non-genuine Samsung
toner cartridges will not be covered under the machine warranty.
•
All printing errors will be appear in the Smart Panel program window.
If the problem persists, call for service.
•
Check the message on the display screen. Follow the instructions in
the message or refer to troubleshooting part (See "Understanding
display messages" on page 8). If the problem persists, call for
service.
Introducing the useful buttons
Menu button
When you want to know the machine status and set your machine to use an
advanced feature, click
Menu
button (See "Machine status and advanced
feature" on page 1).
Stop/Clear button
By pressing the
, you can:
Function
Description
Cancel print job
Press
during printing.
Power Saver button
When the machine is not in use, save electricity by pressing the
Power
Saver
button. Pressing this button for one second puts the machine into
power save mode (See "Using the power saving mode" on page 3).
If you press this button for more than three seconds, a pop-up appears,
asking if you want to turn the power off. If you choose
Yes
, the power is
turned off. This button must then be used to turn the button on.
Status
Description
Off
The machine is not in the power save mode.
Blue
On
The machine is in the power save mode.
In the following cases, the machine wakes up from the power save
mode.
•
Data is received.
•
Front door or scan unit is opened.
•
Control panel key is pressed.
•
Power-switch turn the power on and off.
