SAF CFIP PhoeniX C, Техническое описание, Страница: 133 / 141

133
CFIP PhoeniX C Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.0
•
© SAF Tehnika JSC 2013
IDU1 IDU2 IDU3 IDU4
General | Aggregation
Configuration master slave master slave
IP | Address
Local IP 10.10.10.10/24 10.10.10.11/24 10.10.10.9/24 10.10.10.8/24
Remote IP 10.10.10.9 10.10.10.8 10.10.10.10 10.10.10.11
Protection IP 10.10.10.11 10.10.10.10 10.10.10.8 10.10.10.9
Gateway IP 10.10.10.1 10.10.10.1 10.10.10.1 10.10.10.1
Radio | Parameters
Tx Frequency 14580 MHz 14680 MHz 15000 MHz 15100 MHz
Tx Power 3 dBm 3 dBm 3 dBm 3 dBm
Ports | Parameters
Speed Allocation [Mbps] ETH1 = 170
ETH2 = 1
ETH3 = 0
ETH1 = 0
ETH2 = 0
ETH3 = 0
ETH4 = 170
ETH1 = 170
ETH2 = 1
ETH3 = 0
ETH1 = 0
ETH2 = 0
ETH3 = 0
ETH4 = 170
Ports | ETH VLAN
Port Mode basic = all ports basic = all ports basic = all ports basic = all ports
Port Groups 1 = lan2/3, mng, wanB
2 = lan1, wanA
1 = lan3, mng
2 = lan1, wanA
3 = lan2, wanB
1 = lan2/3, mng, wanB
2 = lan1, wanA
1 = lan3, mng
2 = lan1, wanA
3 = lan2, wanB
Then the proper IP address setting must entered and applied by pressing APPLY button. Such change
must be confirmed at the intermediate window by pressing Write And Apply button.
Figure 123: Example 10 – IP address setting at IDU1 – LOCATION 1
Then the basic radio parameters should be configured.