SAF CFIP PhoeniX C, Техническое описание, Страница: 131 / 141

131
CFIP PhoeniX C Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.0
•
© SAF Tehnika JSC 2013
Figure 121: Example 9 – 1+1 FD with advanced interfaces protection
IDU1 IDU2 IDU3 IDU4
General | Protection
Configuration master/FD slave/FD master/FD slave/FD
IP | Address
Local IP 10.10.10.10/24 10.10.10.11/24 10.10.10.9/24 10.10.10.8/24
Remote IP 10.10.10.9 10.10.10.8 10.10.10.10 10.10.10.11
Protection IP 10.10.10.11 10.10.10.10 10.1010.8 10.10.10.9
Gateway IP 10.10.10.1 10.10.10.1 10.10.10.1 10.10.10.1
Radio | Parameters
Tx Frequency 14580 MHz 14680 MHz 15000 MHz 15100 MHz
Tx Power 3 dBm 3 dBm 3 dBm 3 dBm
Ports | Parameters
Speed Allocation [Mbps] ETH1 = 140
ETH2 = 1
ETH3 = 34
ETH1 = 140
ETH2 = 1
ETH3 = 34
ETH1 = 140
ETH2 = 1
ETH3 = 34
ETH1 = 140
ETH2 = 1
ETH3 = 34
Ports | ETH VLAN
Port Mode basic = all ports basic = all ports basic = all ports basic = all ports
Port Groups 1 = lan3, mng, wanB
2 = lan1/2, wanA
1 = lan3, mng, wanB
2 = lan1/2, wanA
1 = lan3, mng, wanB
2 = lan1/2, wanA
1 = lan3, mng, wanB
2 = lan1/2, wanA
Example 10 – Ethernet traffic aggregation
The 2+0 aggregation mode adds a feature how to increase ETH traffic capacity by means of two
microwave links. 2+0 aggregation configuration is similar to function of two parallel links with MULTI
design where capacity of traffic channel ETH 1 at master unit is aggregated with capacity of traffic