118
CFIP PhoeniX C Series TDM/IP Split Mount System Technical Description and Configuration Guide
•
Rev. 1.0
•
© SAF Tehnika JSC 2013
Figure 102: Example 6 – Ports speed setting at LOCATION 1
Then the SyncE parameters are defined in ETH SyncE section. Port LAN 1 is selected as reference
source, RF stream is automatically synced to such reference when clock recovery status is locked. The
IDU uses recovered CLK from LAN 1 as the main clock reference for both modem and LAN parts.
Figure 103: Example 6 – SyncETH setting at LOCATION 1
Similar configuration is done also at opposite side of link. The receive RF stream is selected as
reference source, selected LAN ports are automatically synced to such reference when clock recovery
status is locked. The IDU uses recovered CLK from RF block as the main clock reference for both
modem and LAN parts.
