Sacmi Imola CHS Series, Инструкция по эксплуатации

Страница: 31 / 116

062AZ005A
FEATURES 2
2-15
2.1.2 INTENDED, PROHIBITED AND MISUSE OF THE MACHINE
INTENDED USE
The machine is specially designed and constructed to produce products that have the characteristics indicated in the
PRODUCT CHARACTERISTICS paragraph.
The machine works in safety if:
- the operating conditions and limits are as those specified in this paragraph;
- it is serviced properly and regularly as indicated in Chapter 8 - MAINTENANCE;
- it is always used correctly by strictly following the directions given in Chapter 6 - OPERATING INSTRUCTIONS.
E0004
WARNING!
If the machine is remote-controlled, it is the customer's responsibility to provide the required signs and indications
during machine operation.
The machine can be run only in the following three modes:
- manual;
- local (automatic);
- remote (automatic).
To enable the desired mode of operation, use the relevant selector switch located on the control panel.
UNINTENDED AND PROHIBITED OPERATIONS
No other use is intended unless otherwise duly authorized by the manufacturer.
SACMI will not be held responsible for any personal injury, equipment damage or malfunctions caused by use
manners different from those specified in this manual.
MISUSE OF ERRONEOUS USE
SACMI shall not be held responsible for malfunctions or personal injury or property damage deriving from incorrect
and erroneous use of the machine.
The most common causes of incorrect use are listed below:
- failure to observe the safety standards, rules and guidelines given in this manual;
- unintended and inappropriate use of the machine;
- personnel not adequately trained to perform the required operations;
- fatigue (above all during the night shift) or distraction;
- negligence caused by superficiality or wrong habits.
The machine must be used only by expert well trained personnel who are completely familiar with its operating
principle and the safety devices provided able to:
- correctly operate the machine under normal conditions;
- and face any emergencies.
E0004
WARNING!
The machine must never be used under the conditions given below and, in any case, the following operations must
never be carried out:
- never remove, lock out or disable any safety devices or guards;
- never lubricate or in any case perform maintenance jobs while the machine is running;
- never climb and/or get on the machine or any parts of it;
- never access the cap diverter (optional) when the machine is running: risk of being crushed.