Sacmi Imola CHS Series, Инструкция по эксплуатации

Страница: 26 / 116

062AZ005A
2 FEATURES
2-10
2.1.1.5 Electrical cabinet
All information regarding the control panel is given in chapter 6 - OPERATING INSTRUCTIONS and in the
INSTRUCTIONS B manual.
2.1.1.6 Pneumatic system
The pneumatic system consists of a control unit 1 housed in the machine base and other parts found near the points
of use to obtain top performance.
FIGURE 2.1.1.6 - PNEUMATIC SYSTEM
1 Pneumatic control unit
2 Hose fitting for connection to mains
3 ¼” fitting for connecting an air blow gun (if provided)
4 Filter clogging indicator: if it comes out of the control unit body, the filter is clogged.
The clogging indicator stays in the control unit body when the air supply is shut off.
5 Air supply valve
6 Button for operating the control unit solenoid valve in manual mode.
The solenoid valve opens whenever the electricity supply goes off
7 Pressure control knob
8 Pressure switch adjustment knob
9 Pressure gauge
10 Control unit solenoid valve led: on, if supplied
11 Pressure switch led: on, if the pressure detected is lower than that set on the pressure switch
12 Pressure switch led: on, if the pressure detected is higher than that set on the pressure switch
13 Filter cover
14 Fitting, Condensate drain line
5
1
2
3
4
6
10
8
9
7
11
12
13
14