Sacmi Imola CHS Series, Инструкция по эксплуатации

Страница: 77 / 116

062AZ005A
START-UP 5
5-1
5 START-UP
5.1 GENERAL INFORMATION
The machine is to be started up the first time by personnel specially trained in the mechanical and electric fields.
E0004
WARNING!
These operations are to be carried out only by the manufacturer’s specially trained personnel in charge of starting
up the machine, as specified in chapter 1 - GENERAL INFORMATION.
Hazardous situations and serious personal injury and/or machine damage may arise if they are performed by
anyone else.
The customer’s machine operator and maintenance staff must simply look on when the machine is started up (to
better understand the operating principle of the machine, how to adjust the auxiliary equipment, accessories and
safety devices and guards employed) and test runs are carried out to check the adjustments made.
5.2 START-UP
5.2.1 PRELIMINARY CHECKS
- Verify that the machine and/or equipment incurred no damage during shipment, handling and installation.
- Make sure all the retainers and fasteners employed for shipment have been removed.
- Make certain all the materials and equipment used for machine installation have been removed.
- Make sure the power supply is as indicated on the machine nameplate.
- Make sure the air supply is as required (see paragraph TECHNICAL FEATURES in chapter 2 of this manual).
- Make sure the cables and/or hoses are properly attached and not damaged or twisted.
- Check to see whether all the shut off valves are open.
- Make sure the guards have been correctly and completely installed.
- Make sure the sequence of the phases is correct by checking the direction in which all the motors run.
- Check operation of all the safety devices.
- Check operation of the audible/visual indicators.
E0004
WARNING!
SACMI shall not be held liable for any personal injury or property damage and all warranties shall be void if:
- spare parts different from those initially installed in the machine are used;
- spare parts are incorrectly installed;
- jobs or modifications not authorized by SACMI are carried out;
- the device is tampered or altered in any way.