Sacmi Imola CHS Series, Инструкция по эксплуатации

Страница: 68 / 116

062AZ005A
4 INSTALLATION
4-2
4.1.1 MACHINE BLOCKS
The machine is divided into various blocks to meet shipping and installation requirements.
4.1.2 DIMENSIONS AND WEIGHTS
The weights and dimensions are approximate in relation to optional equipment, therefore they are given for reference
purposes only.
4.1.3 PART HANDLING
When the crates arrive at the facility, they must be handled with care and transported both inside and outside the
factory with means capable of supporting their weight.
All the parts must be weighed when they arrive on site to verify their exact weight.
The best systems for lifting and handling the heaviest and largest parts as well as those that require special care and
tools provided by SACMI are shown in the figure.
When lifting the smaller parts and packages, be careful and use the most suitable equipment observing the safety
precautions.
E0004
WARNING!
Only specially trained authorized personnel may lift and handle the machine.
No one should be near the hanging load or within the range of action of the lift equipment while the machine is
being lifted and handled.
Follow the instructions for lifting given in the chapter 3 - SAFETY EQUIPMENT AND PRECAUTIONS.
E0004
WARNING!
The manufacturer shall not be held responsible for any personal injury or property damage resulting from failure
to observe current safety standards regarding lifting and handling materials in the user’s facility.