manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 93

5.

Click 

Test

.

6.

Note the Groups associated with this user.

Figure 55: Test authentication settings

7.

Go to 

Configure

 > 

Roles

, and create a Role based on this User Group (see 

Creating

New User Roles

 on page 230).

• Click the 

Create New

 link in the 

Roles

 section

• In the 

Group Attributes

 field, enter Group attributes exactly as they were returned

from the 

Test Authentication Settings

 dialog.

• Specify WLAN access, Guest Pass generation and ZoneDirector administration

privileges as desired for this Role.

At this point, any user who logs in and is authenticated against your LDAP server with
the same Group credentials will automatically be assigned to this Role.

RADIUS /RADIUS Accounting

Remote Authentication Dial In User Service (RADIUS) user authentication requires that
ZoneDirector know the IP address, port number and Shared Secret of the
RADIUS/RADIUS Accounting server.

When an external RADIUS/RADIUS Accounting server is used for authentication or
accounting, user credentials can be entered as a standard username/password
combination, or client devices can be limited by MAC address. If using MAC address
as the authentication method, you must enter the MAC addresses of each client on the
AAA server, and any clients attempting to access your WLAN with a MAC address not
listed will be denied access.

A RADIUS/RADIUS Accounting server can be used with 802.1X, MAC authentication,
Web Authentication (Captive Portal) and Hotspot WLAN types. To configure a
RADIUS/RADIUS Accounting server entry in ZoneDirector:

1.

Go to 

Configure

 > 

AAA Servers

.

2.

Click the 

Create New

 link under Authentication/Accounting Servers.

3.

Select 

Radius

 or 

Radius Accounting

 for the AAA server type.

93

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

Configuring Security and Other Services

Using an External AAA Server

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды