manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 322

user/guest/log and other records, accounts and preference configurations would need
to be manually reconfigured.

NOTE

 Resetting ZoneDirector to factory default settings will erase all configuration

changes that you made, except for AP licenses and SSL certificates.

NOTE

 When this procedure is complete, you will need to redo a complete setup. If

ZoneDirector is on a live network, a new IP address may be assigned to the system. In
this case, the system can be discovered by a UPnP client application, such as Windows
“My Network Places.” If there is no DHCP server on the connected network, the system's
default IP address is 192.168.0.2 with subnet mask 255.255.255.0.

NOTE

 A complete set of instructions is available in the ZoneDirector Quick Start Guide

(QSG). Before restoring ZoneDirector to factory default settings, you should open and
print out the QSG pages. You can follow those instructions to set up ZoneDirector after
restoring factory defaults.

To reset your ZoneDirector to factory default settings:

1.

Go to 

Administer

 > 

Backup

.

2.

Locate the 

Restore to Factory Settings

 and click the button.

NOTE

 Owing to the drastic effect of this operation, one or more confirmation dialog

boxes will appear. Click 

OK

 to confirm this operation.

3.

When this factory reset process begins, you will be logged out of the web interface.

4.

When the reset is complete, the Status LED begins blinking green, indicating that
the system is in the "factory default" state. After you complete the Setup Wizard, the
Status LED will be steady green.

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

322

Setting Administrator Preferences

Restoring ZoneDirector to Default Factory Settings

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды