Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Страница: 63 / 361

6. To verify that ZoneDirector can send alarm messages using the SMTP settings you
configured, click the
Test button.
• If ZoneDirector is able to send the test message, the message Success! appears
at the bottom of the Email Notification page. Continue to Step 7.
• If ZoneDirector is unable to send the test message, the message Failed! appears
at the bottom of the Email Notification page. Go back to Step 5, and then verify
that the SMTP settings are correct.
7. Click Apply . The email notification settings you configured become active immediately.
Figure 33: The Alarm Settings page
NOTE If the Test button is clicked, ZoneDirector will attempt to connect to the mail
server for 10 seconds. If it is unable to connect to the mail server, it will stop trying
and quit.
NOTE When the alarm email is first enabled, the alarm recipient may receive a flood
of alarm notifications. This may cause the mail server to treat the email notifications
as spam and to temporarily block the account.
NOTE oneDirector sends email notifications for a particular alert only once, unless
(1) it is a new alert of the same type but for a different device, or (2) existing alert logs
are cleared.
Customizing Email Alarms
Using the Alarm Event section of the Configure > Alarm Settings page, you can choose
which types of events will trigger ZoneDirector to send an email notification.
1. Click Alarm Event to select/deselect all alarm types.
63 Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Configuring System Settings
Setting Up Email Alarm Notifications