Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Страница: 217 / 361

1. Go to Configure > Access Points .
2. Click the Edit link next to the AP you want to configure.
3. Scroll down to the bottom and expand the Hotspot 2.0 Settings section.
4. In Venue Name List , click Create New to create a new venue name for this AP.
Select the language and enter the venue name in that language.
5. Click Save to save the entry, and click OK to save the Venue Name settings for the
AP.
Figure 147: Setting the Venue Name for a Hotspot 2.0 service AP
Optimizing Access Point Performance
ZoneDirector, through its web interface, allows you to remotely monitor and adjust key
hardware settings on each of your network APs. After assessing AP performance in the
context of network performance, you can reset channels and adjust transmission power,
or adjust the priority of certain WLANs over others, as needed.
Assessing Current Performance Using the Access Point Table
1. Go to Monitor > Access Points .
2. When the Access Points page appears, review the Currently Managed APs table
for specific AP settings, especially the Channel and Clients columns.
3. Click on the MAC address of any AP to view detailed information about the AP such
as associated clients, channel, signal strength, neighbor APs and warnings/events
associated with the AP.
4. If you want to make changes to individual AP settings, proceed to the next task,
Adjusting AP Settings on page 218.
217 Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Managing Access Points
Optimizing Access Point Performance