manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 288

The uplink and downlink throughput curves show the actual throughput of the client as
measured by the AP. These curves are influenced by the user session, and they vary as
a function of gaps in browsing activity and internet server response times.

Monitoring Wired Clients

You can monitor currently connected wired clients using the Monitor >Wired Clients
page.

This page displays all currently connected 802.1X or tunneled wired client devices. Only
devices with an "authorized" status are permitted access to the network. The 

Clients

table lists the wired client's MAC address, user name or IP address, the AP it is connected
to, the LAN, VLAN and authorization status. The 

Events / Activities

 table displays recent

connection and authentication events related to wired clients only.

Monitoring AAA Server Statistics

To monitor AAA server (RADIUS) statistics, go to Monitor > AAA Servers.

Reviewing Current Alarms

If an alarm condition is detected, ZoneDirector will record it in the events log, and if
configured, will send an email warning.

To review the current alarms and clear all resolved alarm records, follow these steps:

1.

Go to 

Monitor

 > 

All Alarms

.

2.

When the 

All Alarms

 page appears, the 

Alarms

 table lists the unresolved alarms,

the most recent at the top.

3.

Review the contents of this table. The 

Activities

 column is especially informative.

4.

If a listed alarm condition has been resolved, click the 

Clear

 link to the right. You also

have the option of clicking 

Clear All

 to resolve all alarms at once.

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

288

Monitoring Your Wireless Network

Monitoring Wired Clients

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды