manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 212

APs' primary/secondary ZD settings will not be overwritten by the secondary
ZoneDirector's configuration after failover to the secondary controller.

12.

Click 

Apply

 to save your changes.

13.

Reboot the backup/secondary ZoneDirector for all changes to take effect (

Administer

> 

Restart

 > 

Restart

.)

The imported APs will be placed into AP Groups according to the settings that were
backed up from the primary controller. If the original AP Group or WLAN Group name
does not exist on the destination controller, the AP will be placed in the System Default
AP Group/WLAN Group. Additionally, you must make sure that the maximum number
of APs is not exceeded.

Table 29: Max APs per Controller

Max APs per controller

Model

150

ZoneDirector 1200

500

ZoneDirector 3000

1000

ZoneDirector 5000

Importing a USB Software Package

Ruckus ZoneFlex Access Points with USB ports ("SmartPoint" APs) can be configured
to support a range of 3G, 4G/LTE, and WiMAX wireless USB devices for non-Wi-Fi
wireless connection to a service provider's network.

The ZoneDirector web interface allows administrators to provision SmartPoint APs with
the USB device configuration files directly through ZoneDirector, providing a simple and
straightforward provisioning process with minimal human intervention required.

Provisioning requires that the SmartPoint Access Points must be connected to the
ZoneDirector acting as the provisioning server over the wired network. After an AP is
provisioned, an automatic 3G/4G/LTE/WiMAX network connection is made to connect
the AP to the Internet, then to ZoneDirector, enabling the creation of an LWAPP tunnel
and providing 802.11 wireless services.

To upload a USB provisioning file to ZoneDirector:

1.

Go to 

Configure

 > 

Access Points

.

2.

Scroll down to Access Point USB Software Packages.

3.

Click 

Choose File

, and select the file to upload.

4.

Click 

OK

 to upload the file to ZoneDirector

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

212

Managing Access Points

Importing a USB Software Package

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды