manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 311

unavailable, the AP status on the Monitor > Access Points page will appear as 

Isolated

Mesh AP

.

6.

Click 

OK

 to save your settings.

Troubleshooting Isolated Mesh APs

Isolated Mesh APs are those that were once managed by ZoneDirector but are now
unreachable. They are up and running and constantly searching for mesh uplinks, but
are unable to connect to any root AP. You can check if you have any isolated mesh APs
on the network by checking the 

Monitor

 > 

Access Points

 page.

NOTE

 A mesh network is dynamic in nature. Before attempting to resolve any

mesh-related issue, please wait 15 minutes to allow the mesh network to stabilize. Some
mesh-related issues are automatically resolved once the mesh network stabilizes.

Understanding Isolated Mesh AP Statuses

There are five possible reasons for a mesh AP to become isolated. The table below lists
all possible Isolated Mesh AP statuses that may appear on the Monitor > Access Points
page, and provides possible reasons for the isolation and the recommended steps for
resolving the issue.

Possible Reason

Status

You have set uplink selection to Manual,
but none of the uplink APs you specified is
available or reachable. To resolve this, go
to the Configure > Access Points page on
the ZoneDirector web interface, and then
click SmartSelection.

No APs in manual uplink selection

The AP cannot find other APs within the
internally defined limit to the number of
hops. The hop limit mechanism helps
ensure that mesh APs maintain reasonable
network performance. To resolve this, add
additional Root APs near this isolated Mesh
AP.

No APs within hop-limit

The AP is still searching for uplinks. This is
usually a temporary state and is typically
resolved automatically within 15 minutes
as the mesh network stabilizes. If there is
a significant number of APs on the network,
it might take longer for the AP to resolve
this.

Searching for uplinks

311

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

Deploying a Smart Mesh Network

Troubleshooting Isolated Mesh APs

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды