manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 82

To disable Load Balancing on a per-WLAN basis

1.

Go to 

Configure

 > 

WLANs

 > 

.

2.

Click the 

Edit

 link beside the WLAN for which you want to disable load balancing.

3.

Click the 

Advanced Options

 link to expand the options.

4.

Select 

Do not perform load balancing for this WLAN service

 next to 

Load

Balancing

.

Band Balancing

Band balancing balances the client load on radios by distributing clients between the
2.4 GHz and 5 GHz radios.

This feature is enabled by default and set to a target of 25% of clients connecting to the
2.4 GHz band. To balance the load on a radio, the AP encourages dual-band clients to
connect to the 5 GHz band when the configured percentage threshold is reached.

Radar Avoidance Pre-Scanning

The Radar Avoidance Pre-Scanning (RAPS) setting allows pre-scanning of DFS channels
in the 5 GHz band to ensure the channel is clear of radar signals prior to transmitting on
the channel.

If a channel is blocked by this feature, it will be listed as "DFS Block Radar" on the AP
monitoring page. This setting affects select outdoor dual band 802.11n AP also only be
available if the Country Code settings are configured to allow use of DFS channels (see

Setting the Country Code

 on page 55).

AeroScout RFID Tag Detection

AeroScout Tags are lightweight, battery-powered wireless devices that accurately locate
and track people and assets. AeroScout Tags, which can be mounted on valuable
equipment or carried by personnel, send periodic data to the AeroScout Engine, the
software component of the AeroScout visibility system that produces accurate location
and presence data. If you are using AeroScout Tags in your organization, you can use
the APs that are being managed by ZoneDirector to relay data from the AeroScout Tags
to the AeroScout Engine. You only need to enable AeroScout tag detection on
ZoneDirector to enable APs to relay data to the AeroScout engine.

To enable AeroScout RFID tag detection on ZoneDirector:

1.

Go to 

Configure

 > 

Services

.

2.

Scroll down to the AeroScout RFID section (near the bottom of the page).

3.

Select the 

Enable AeroScout RFID tag detection

 check box.

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

82

Configuring Security and Other Services

Band Balancing

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды