Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Страница: 276 / 361

Action Icon Name Icon
Allow this AP to be managed by ZoneDirector.
This icon will only appear if you have disabled
automatic approval under "Access Point
Policies" on the
Configure > Access Points
page.
Allow
Click this button to migrate an AP to another
controller. Join
Another
Controller
Launch the Spectrum Analysis window. Spectrum
Analysis
Launch the AP Performance window. Performance
Migrating an AP from ZoneDirector to Another Controller
The Migrate (join another controller) button allows you to migrate ZD-controlled APs to
SmartZone or Ruckus Cloud control. When clicked, the AP is blocked from joining
ZoneDirector, enables a SmartZone discovery client and reboots. After the reboot it
begins searching for a new controller, either on premises or in the cloud.
Once the Migrate button is clicked, the following two actions will be taken:
1. The AP's SmartZone discovery process - called "wsgclient" - will be started.
2. Zonedirector will ignore this AP's discovery requests; ZD blocks the AP from joining
until the block is manually removed.
The AP can discover SZ as usual, via any of the following methods:
• mDNS discovery on local IP subnet
• DHCP Option 43 sub-option 6
• DHCPv6 Option 17 sub-option 6
• DHCPv6 Option 52
• DNS entry named "ruckuscontroller.<local domain>"
• AP CLI command "set scg ip"
For more information on these SmartZone discovery methods, refer to the SmartZone
Admin Guide .
NOTE If you have blocked an AP this way and want to allow it to join ZoneDirector
again, go to Configure > Access Points and click Allow
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide 276
Monitoring Your Wireless Network
Monitoring Access Points