Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Страница: 247 / 361

5. Under Description , type a name or description for the access rule that you are
creating.
6. Under Type , select Deny if this rule will prevent guest users from accessing certain
subnets, or select Allow if this rule will allow them access.
7. Under Destination Address , type the IP address and subnet mask (format:
A.B.C.D/M) on which you want to allow or deny users access.
8. If you want to allow or restrict subnet access based on the application, protocol, or
destination port used, click the
Advanced Options link, and then configure the
settings.
9. Click OK to save the subnet access rule.
Repeat Steps 4 to 9 to create up to 22 subnet access rules.
Figure 177: The Restricted Subnet Access options
Creating a Guest WLAN
Once you have created a guest access service, create a WLAN of the type "Guest
Access."
This WLAN can be configured to allow access only to a specific set of resources - such
as ZoneDirector's Zero-IT activation address - from which users can then activate their
devices to gain access to the secure internal WLANs.
To create a Guest WLAN:
1. Go to Configure > WLANs .
2. Under WLANs, click Create New . The Create New WLAN form appears.
3. Enter a Name (SSID) for this WLAN that will be easy for your guests to remember
(e.g., "Guest WLAN"). The Description field is optional.
247 Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
Managing Guest Access
Creating a Guest WLAN