manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 62

2.

To enable email notification, select the 

Send an email message when an alarm is

triggered 

check box.

3.

Enter the recipient email address in the 

Email Address

 box provided, and click 

Apply

.

4.

Go to 

Configure

 > 

System

, and scroll down to the 

Email Server

 section.

5.

Configure the settings listed in the following 

SMTP settings for email notification

table.

Description

SMTP Setting

Type the email address from which
ZoneDirector will send alarm messages.

From email address

Type the full name of the server provided by
your ISP or mail administrator. Often, the SMTP
server name is in the format

smtp.company.com

. For Hotmail addresses,

the SMTP server name is smtp.live.com.

SMTP Server Name

Type the SMTP port number provided by your
ISP or mail administrator. Often, the SMTP port
number is 

25

 or 

587

. The default SMTP port

value is 

587

.

SMTP Server Port

Type the user name provided by your ISP or
mail administrator. This might be just the part
of your email address before the @ symbol, or
it might be your complete email address. If you
are using a free email service (such as Hotmail
or Gmail), you typically have to type your
complete email address.

SMTP Authentication Username

Type the password that is associated with the
user name above.

SMTP Authentication Password

Retype the password you typed above to
confirm.

Confirm SMTP Authentication
Password

If your mail server uses TLS encryption, click
the 

SMTP Encryption Options

 link, and then

select the 

TLS

 check box. Additionally, select

the

 STARTTLS

 check box that appears after

you select the TLS check box. Check with your
ISP or mail administrator for the correct
encryption settings that you need to set. If using
a Yahoo! email account, 

STARTTLS

 must be

disabled. If using a Hotmail account, both 

TLS

and 

STARTTLS

 must be enabled.

SMTP Encryption Options

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

62

Configuring System Settings

Setting Up Email Alarm Notifications

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды