manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, Руководство пользователя

Поделиться
Скачать
Ruckus Wireless ZoneDirector 1200 Скачать руководство пользователя страница 16

•

Front Panel LEDs

 on page 16

Figure 1: ZoneDirector 1200

Buttons, Ports, and Connectors

The following table describes the buttons, ports and connectors on ZoneDirector 1200.

Table 3: ZoneDirector 1200 front panel elements

Description

Label

Use the Reset button to restart ZoneDirector.

Reset

Two auto negotiating 10/100/1000Mbps Ethernet ports.

10/100/1000 Ethernet

RJ-45 Console port for accessing the ZoneDirector command
line interface.

Console

Factory Default button. To reset ZoneDirector to factory default
settings, press and hold the F/D button for at least five (5)
seconds. For more information, refer to

Alternate Factory Default Reset Method

 on page 323.

NOTE

 Resetting ZoneDirector to factory default settings will

erase all configuration changes that you made, except for AP
licenses and SSL certificates.

F/D

Front Panel LEDs

The following table describes the LEDs on the front panel of ZoneDirector 1200.

Table 4: ZoneDirector ZoneDirector 1200 LED descriptions

Meaning

State

LED Label

ZoneDirector is receiving power.

Solid Green

Power

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

16

Introducing ZoneDirector

ZoneDirector Physical Features

Содержание ZoneDirector 1200










































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды