ROPA Panther 2S, Перевод оригинального руководства по эксплуатации

Страница: 182 / 560

Operation
Road traffic
– the depth-control wheels must be swung in and locked (does not apply to R*SO
and R*SU).
– The red/white warning signs (as shown in the illustration) must be attached and
secured using split pins. In addition, all red/white warning plates and warning
stripes must always be kept in clean and perfect condition. Before driving on public
paths and roads, the warning plates and warning stripes must be cleaned in such a
manner that the warning function is not impaired.
– Couple the additional chassis (
See Page 184
), (not required in some countries).
– On machines with leaf-spreader it must be completely folded in.
– select the operating mode "Road".
– rear wheel steering must be set to 0° position and synchronized steering of the
articulation joint must be synchronized with the front axle (
See Page 199
).
– the steering of rear axle must be locked (lock main steering switch!)
– check the operating and traffic safety of the machine.
– the machine must be sufficiently cleaned.
– all working floodlights must be switched off.
– both mounting ladders must be swung into the vehicle profile and secured.
– switch off the incline system (if provided) and align the machine in neutral position.
– lower the additional axle (if installed) for driving on public roads and streets. Always
ensure that there is no one in the area of the additional axle BEFORE lowering the
additional axle.
The additional axle is loaded hydraulically damped with a pressure accumulator.
Press the key on keypad III to activate or deactivate the additional axle.
When the additional axle is raised until stop, the LED in button disappears and the icon
appears on the R-Touch.
182 / 560