ROPA Panther 2S Скачать руководство пользователя

Страница: 69 / 560

Operating Components

Driver’s seat

Height adjustment

The seat height can be set pneumatically

and is infinitely adjustable.
The seat height can be altered by pulling

or pressing the actuator lever (arrow). If

the adjustment reaches the top or bottom

end stop, the height is adjusted automat-

ically in order to guarantee a minimum

spring travel.
Set the shock absorber to the soft setting

before adjusting the height.
In order to avoid damage, do not operate

compressor for more than 1 minute.

Seat depth adjustment

The depth of the seat pan can be individ-

ually adjusted.
Pull the right handle up to adjust the seat

depth. By moving the seat cushion back-

wards or forwards the desired seating

position can be reached.

Seat pan angle adjustment

The angle of the seat pan can be individu-

ally adjusted.
Pull the left handle up to adjust the seat

angle. By exerting pressure on or off the

seat pan it can be moved to the desired

angle position.

Longitudinal adjustment

Moving the locking lever upwards

releases the longitudinal adjustment.
After adjustment the locking lever must

audibly latch into the desired position. It

should not be possible to move the dri-

ver’s seat into another position when it is

locked.
Do not life the locking lever with the leg or

calf.

69 / 560

Содержание Panther 2S

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды

ROPA Panther 2S, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды