ROPA Panther 2S Скачать руководство пользователя

Страница: 33 / 560

Safety

Safety and health protection

355007700 (25)
Hazard that body parts can be pulled in. Do not reach into the rotating rollers. Do not climb

on the rollers. Never step into the loading areas when the drive activated and motor run-

ning.

355007800 (11)
Hazard of lowering

machine parts! Staying

in the hazard zone is

only admissible when the

safety lock for the lifting

cylinder is engaged.

355008000 (42)
Explosion hazard. The

pressure reservoir is

under very high pres-

sure. Perform removal

and repair only follow-

ing instructions from the

manual.

355006700 (44)
Never step in the hazard

area between attached

device and machine.

355006500 (37)
Falling hazard! Riding on

steps or platforms is pro-

hibited.

2.7

Safety and health protection

The stipulations and regulations listed below must be rigorously observed in order to

reduce the risk of personal injury and/or property damage. Furthermore, the region-

ally applicable regulations and instructions on safety at work and for safe handling of

self-propelled processing machines must be observed in any case. For safety rea-

sons, anyone working with the machine must have read and understood the operating

instructions. He must also be familiar with the applicable regulations on safety at work

and health protection regulations.
For safe operation of the machine, the applicable health protection regulations, the rel-

evant national work safety regulations or equivalently applicable national work safety

and health protection regulations of other member states of the European Union or

other states which have signed the agreement on the European Economic Area must

be rigorously applied.
The operator is obliged to provide the applicable regulations in their current versions

free of charge to the machine operator.

The machine may only be used for its intended purpose and in compliance with

these operating instructions.

The machine must be used and operated in such a manner that its stability is guar-

anteed at any time.

The machine may not be operated in enclosed rooms.

The effectiveness of operating and adjusting components may not be impaired or

overridden without approval.

33 / 560

Содержание Panther 2S

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды

ROPA Panther 2S, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды