ROPA Panther 2S Скачать руководство пользователя

Страница: 25 / 560

Safety

Obligations of the entrepreneur

2.1

General

The machine has been manufactured according to the current state of technology and

tested for safety.
The machine is CE compliant and therefore conforms to the respective European reg-

ulations for free movement of goods within the European Union respectively the Euro-

pean economic region.
Modifications to this machine may only be performed with the express approval of the

manufacturer, since otherwise the manufacturer's warranty lapses. In addition, the

road traffic registration may lapse and other registrations of the machine may become

invalid. The operating manual supplied must be strictly observed. The manufacturer

shall not be liable for damage caused by incorrect handling, inappropriate application

or incorrect repairs respectively missing maintenance and service carried out by the

customer. The machine may only be operated in a technically perfect condition, for its

intended purpose and with due consideration of the risks involved.

2.2

Obligations of the entrepreneur

The entrepreneur employing the machine, respectively his agent, is obliged:

to observe the applicable European and national work and safety regulations.

to instruct the machine operators about their special obligation for safe driving of

the machine. These instructions must be given anew before the start of each sea-

son. Records must be prepared about giving of these instructions, which must be

signed by the entrepreneur and the instructed machine operator. These records

must be kept for at least one year by the entrepreneur.

before first use of the machine, to instruct the machine operators about operation

respectively about safe handling of the machine.

Forms for these instructions may be found in Chapter 9 of this operating manual (doc-

umentation of instructions given to the driver,

See Page 547

). When needed, please

copy these forms before completing them.

25 / 560

Содержание Panther 2S

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды

ROPA Panther 2S, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды