ROPA Panther 2S Скачать руководство пользователя

Страница: 367 / 560

Maintenance and Service

Diesel engine

7.1.3

Fuel supply

ADVICE

Hazard of damage to the environment from leaking fuel. When working on the filter,

first set up the catching pan and properly dispose of fuel caught.

WARNING

Burning hazard when handling diesel fuel.

Smoking, fire and open flames are prohibited when handling diesel fuel, because fuels

are easily combustible and fuel fumes cause an explosion hazard. Always make sure

of sufficient supply of fresh air when handling fuels.
Hazard of skin injuries and poisoning. Diesel fuel may cause damage to the skin in

case of direct contact. When handling diesel fuel, always wear suitable protective

gloves, avoid inhaling fuel fumes, because it may lead to poisoning effects.

Diesel fuel is sucked by the fuel pump through the fuel prefilter with integrated electric

pump and integrated water separator and then pumped through the fuel prefilter and

the main fuel filter cartridge to the pump-nozzle elements.

Help by diesel engine start:

The electric pump (

) switches on after every switching on of the ignition for a limited

period of time. It serves to forward possibly fallen back fuel to the engine and to facil-

itate the starting action of the engine. The electric pump is activated every time the

engine is started. Once the engine has started, the electric pump is switched off.

ADVICE

When the engine is running, the electric pump cannot be switched on. Thus, do NOT

set the option to "On" in the "Special functions" menu, "Fuel pump" line.

The filter cartridges must be exchanged according to the maintenance plan. The fuel

filter cartridge must be changed immediately regardless of the operating hours as soon

as the icon appears on the R-Touch.

See Page 370

However, if the following icon appears on the R-Touch, the fuel prefilter insert at the

electric pump must be exchanged. (

See Page 369

)

367 / 560

Содержание Panther 2S

















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды

ROPA Panther 2S, Перевод оригинального руководства по эксплуатации

Результаты поиска

Содержание Panther 2S

Отзывы:

Похожие инструкции для Panther 2S

Бренды по названию

Популярные бренды