Ronde & Schwarz R&S FPL1000, Руководство пользователя

Страница: 296 / 1076

The Spectrum Application (RF Measurements)
R&S
®
FPL1000
296 User Manual 1178.3370.02 ─ 09
For details, see Chapter 7.3.3.1, "Basics on the Internal Generator" , on page 283.
Usage ..........................................................................................................................296
State ............................................................................................................................296
Level Offset ................................................................................................................. 297
Frequency Offset .........................................................................................................297
Level Start / Level Stop ............................................................................................... 297
Calibrate Transmission ................................................................................................297
Normalization state ..................................................................................................... 297
Usage
Determines the type of signal provided by the internal generator:
●
"Independent CW source" on page 283: constant frequency and power level
●
"Tracking generator" on page 284: constant power level, frequency follows ana-
lyzer frequency (only available for frequency sweeps in the Spectrum application)
●
"Power sweep" on page 284: constant frequency, linearly increasing power level
(only available in the Spectrum application)
Remote command:
SOURce<si>:FREQuency:COUPling[:STATe]
on page 802
SOURce<si>:POWer:MODE
on page 805
State
Enables or disables the internal generator. The generator signal is output at the GEN
Output
50
Ω
connector on the front panel.
Remote command:
OUTPut<up>[:STATe]
on page 800
Receiving Data Input and Providing Data Output