Ronde & Schwarz R&S FPL1000, Руководство пользователя

Страница: 18 / 1076

Getting Started
R&S
®
FPL1000
18 User Manual 1178.3370.02 ─ 09
5.1.3 Choosing the Operating Site
Specific operating conditions ensure accurate measurements and avoid damage to the
product and connected devices. For information on environmental conditions such as
ambient temperature and humidity, see the data sheet.
See also "Choosing the operating site" on page 9.
Electromagnetic compatibility classes
The electromagnetic compatibility (EMC) class indicates where you can operate the
product. The EMC class of the product is given in the data sheet under "General data".
●
Class B equipment is suitable for use in:
– Residential environments
– Environments that are directly connected to a low-voltage supply network that
supplies residential buildings
●
Class A equipment is intended for use in industrial environments. It can cause
radio disturbances in residential environments due to possible conducted and radi-
ated disturbances. It is therefore not suitable for class B environments.
If class
A equipment causes radio disturbances, take appropriate measures to
eliminate them.
5.1.4 Setting Up the R&S FPL1000
The R&S FPL1000 is designed for use either on a bench top or in a rack, or as a porta-
ble instrument (with optional battery operation) in a transport bag in the field.
See also:
●
"Setting up the product" on page 9
●
"Intended use" on page 8
5.1.4.1 Placing the R&S FPL1000 on a Bench Top
To place the product on a bench top
1. Place the product on a stable, flat and level surface. Ensure that the surface can
support the weight of the product. For information on the weight, see the data
sheet.
2.
CAUTION! Foldable feet can collapse. See "Setting up the product" on page 9.
Always fold the feet completely in or out. If they are folded out, do not place any-
thing on top or underneath.
3.
CAUTION! The product can fall over and cause injury. The top surface is too small
for stacking. Never stack another product on top of the product.
Preparing for Use