manualshive.com logo in svg

Ronde & Schwarz R&S FPL1000, Руководство пользователя

Поделиться
Скачать
Ronde & Schwarz R&S FPL1000 Скачать руководство пользователя страница 13

Documentation-Overview

R&S

®

FPL1000

13

User Manual 1178.3370.02 ─ 09

3

 

Documentation-Overview

This section provides an overview of the R&S

 

FPL1000 user documentation. Unless

specified otherwise, you find the documents on the R&S

 

FPL1000 product page at:

www.rohde-schwarz.com/manual/FPL1000

3.1

 

Getting Started Manual

Introduces the R&S

 

FPL1000 and describes how to set up and start working with the

product. Includes basic operations, typical measurement examples, and general infor-
mation, e.g. safety instructions, etc.

A printed version is delivered with the instrument. A PDF version is available for down-
load on the Internet.

3.2

 

User Manuals and Help

Separate user manuals are provided for the base unit and the firmware applications:

●

Base unit manual
Contains the description of all instrument modes and functions. It also provides an
introduction to remote control, a complete description of the remote control com-
mands with programming examples, and information on maintenance, instrument
interfaces and error messages. Includes the contents of the getting started manual.

●

Firmware application manual
Contains the description of the specific functions of a firmware application, includ-
ing remote control commands. Basic information on operating the R&S

 

FPL1000 is

not included.

The contents of the user manuals are available as help in the R&S

 

FPL1000. The help

offers quick, context-sensitive access to the complete information for the base unit and
the firmware applications.

All user manuals are also available for download or for immediate display on the Inter-
net.

3.3

 

Service Manual

Describes the performance test for checking the rated specifications, module replace-
ment and repair, firmware update, troubleshooting and fault elimination, and contains
mechanical drawings and spare part lists.

The service manual is available for registered users on the global Rohde

 

&

 

Schwarz

information system (GLORIS):

Service Manual

Содержание R&S FPL1000





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды