Roland VersaStudio BT-12, Руководство по эксплуатации

Страница: 109 / 234

Using the [Maintenance] Menu
107
11.
Select the items that you need to adjust, and then press the [# Enter] key.
12.
Enter the optimal adjustment values from Step 8, and then press the [#Enter] key.
13.
Press the [Escape] key until the top screen appears.
• This function can also be used with paper. When loading the paper on the tray, fix it to all
sides of the tray with tape so that the paper does not lift up. You also need to adjust the
height of the tray.
For details, see page 189 "
Adjusting the Height of the Tray ".
DYX111
Registration
Print a test pattern to adjust the print start position of the fabric.
Look at the left, right, upper, and lower margins, and adjust them if you want to shift the printing
position.
Doing this is usually not necessary.
1.
Load the fabric in the tray. Align the fabric with the corners of the table.
2.
Press the [ /Menu] key.
3.
Press the [ ] or [ /Menu] key to display [Maintenance], and then press the
[#Enter] key.
4.
Press the [ ] or [ /Menu] key to display [Registration], and then press the
[#Enter] key.
<Maintenance>
Registration
<Menu>
Maintenance
<A>
( ‐ 4, +4) ‐ 1
<Adjustment>
1.A