Roland VersaStudio BT-12, Руководство по эксплуатации

Страница: 43 / 234

41
Connecting the Computer and Installing the Software (USB Connection)
8.
Select whether or not to open the Status Monitor automatically, and then click
[Next >].
9.
If you want to make initial settings for the printer, click [Set Now].
10.
Make initial settings, and then click [OK].
11.
Click [Finish].
The printer driver is now installed.
•
When you insert the CD‐ROM, the installer launches. Auto Run might not work automatically
with certain OS settings. If this is the case, double‐click "SETUP.EXE", located on the CD‐ROM
root directory, or click [Run SETUP.EXE] in the [AutoPlay] dialog box.
• If a message prompting you to restart the computer appears, restart the computer.
• In order to confirm that the printer driver is correctly installed, check that the power lamp is
lit, and then perform a test print. To perform a test print, open the properties of the printer
driver and click [Print Test Page] under the [General] tab. If the test page does not print
properly, see page 184 "
If Test Print Fails ".
Installing the printer driver manually using a USB cable
This section explains how to install the printer driver manually by connecting the machine to a
computer using a USB cable.
If you installed the printer driver by performing Quick Install for USB, there is no need to install it
again.
• Only administrators can perform this installation. Log on as a member of the
Administrators group.
• Do not turn the machine on until you have read how to do so.
1.
Insert the driver CD in the CD‐ROM drive.
Quit all other applications currently running.
If the "Add New Hardware Wizard" appears, click [Cancel], and then turn the machine off.