Roland VersaStudio BT-12, Руководство по эксплуатации

Страница: 110 / 234

5. Machine Setup Menus
108
5.
Press the [ ] or [ /Menu] key to display [Pr.Test Pattern], and then press the
[#Enter] key.
6.
Press the [Start] key.
A test pattern to adjust the print start position is printed.
Check the optimal adjustment values on the printed test pattern if necessary.
7.
Check the length of "a" and "b", or "x" and "y" in the figure.
Keep the fabric or paper loaded on the tray.
• When adjusting the print position in the horizontal direction
Check the length of "a" and "b" in the figure. To shift the printed cross mark by one
gradation on the scale in the "+" direction, the adjustment value in [Read Direction]
should be "+1.0".
• When adjusting the print position in the vertical direction
Check the length of "x" and "y" in the figure. To shift the printed cross mark by one
gradation on the scale in the "+" direction, the adjustment value in [Feed Direction]
should be "+1.0".
DYX108
a b
x
y
8.
Press the [ ] or [ /Menu] key to display [Adjustment], and then press the
[#Enter] key.
<Registration>
Adjustment
<Registration>
Pr.Test Pattern